On August 1st, the State Administration for Market Regulation (Standardization Administration of the People's Republic of China) issued nine national standards related to plastic and recycled plastic in one go through its Announcement No. 19 of 2025, all of which will be implemented from February 1st, 2026. The standards issued cover quality standards, product evaluation, component identification, recyclable design, traceability, and environmental factor assessment for recycled plastics, providing full-process technical support for the construction of a closed-loop plastic recycling system and clearer regulations for the production and use of recycled plastics.

The relevant standard is under the jurisdiction of the China Petroleum and Chemical Industry Federation, with the TC15 (National Technical Committee on Plastics Standardization) as the centralized unit, and the China Plastics Recycling and Reuse Association (CPRRA) as the standard preparation organizer.

Nine national standards were issued

According to Announcement No. 19 of 2025 issued by the State Administration for Market Regulation (National Standardization Administration), a total of nine national standards were released in this batch, specifically:

1. Recyclable and renewable design category

"Plastics - Recyclable and Recycled Design Guidelines - Part 1: Polyethylene Terephthalate (PET) Materials" (GB/T 46020.1-2025)

Main drafting units: Guangxi Wuzhou Guolong Renewable Resources Development Co., Ltd., Fujian Sailong Technology Co., Ltd., Avery Dennison (China) Co., Ltd., Fuzhou Urban Construction Investment New Infrastructure Group Co., Ltd., Haolai Chemical (Zhongshan) Co., Ltd., Jiangsu Saixiel New Material Technology Co., Ltd., Chengdu Huantou Recycling Technology Co., Ltd., Taiyuan Institute of Technology, China Bluestar Chengdu Testing Technology Co., Ltd., South China University of Technology, Unilever (China) Co., Ltd., Hebei Juxun Renewable Resources Recycling Co., Ltd., Nongfu Spring Co., Ltd., Ningbo Lishi Daily Necessities Co., Ltd., Henkel (China) Investment Co., Ltd., Danone (China) Food and Beverage Co., Ltd., UPM Raflatac (China) Co., Ltd., L'Oreal (China) Co., Ltd., Nivea (Shanghai) Co., Ltd., China Petroleum Group Petrochemical Research Institute Co., Ltd., Hebei Tenghong Industrial Co., Ltd., Mitsubishi Gas Chemical Trading (Shanghai) Co., Ltd., Fujian Canhua Environmental Protection Materials Co., Ltd., Henan Zhongyang Environmental Protection Technology Co., Ltd., Anhui Peak Technology Co., Ltd., Shenyang Baobao Technology Development (Beijing) Co., Ltd., Shenzhen Lvhuan Renewable Resources Development Co., Ltd., Wuxi Yiwei Import and Export Co., Ltd., Beijing Huasu Chenguang Technology Co., Ltd., China Synthetic Resin Association, Tonggui Technology Chengdu Co., Ltd., and Guangzhou Customs Technical Center."Plastics - Recyclable and Recycling Design Guidelines - Part 2: High-Density Polyethylene (PE-HD) Materials" (GB/T 46020.2-2025)Main drafting units: Anhui Guanhong Plastic Industry Co., Ltd., Anhui Fulin Environmental Protection Technology Co., Ltd., Avery Dennison (China) Co., Ltd., Fuzhou Urban Construction Investment New Infrastructure Group Co., Ltd., Essel (Guangzhou) Packaging Co., Ltd., L'Oréal (China) Co., Ltd., Hebei Zaimei Polymer Materials Co., Ltd., Guangzhou Shitian Material Technology Co., Ltd., Jiangsu Saixian New Material Technology Co., Ltd., Kuraray International Trading (Shanghai) Co., Ltd., Hangzhou Sanjing Craft Plastic Co., Ltd., Taiyuan Institute of Technology, Sanying Packaging (Jiangsu) Co., Ltd., Unilever (China) Co., Ltd., Nivea (Shanghai) Co., Ltd., Helion (China) Co., Ltd., China Bluestar Chengdu Testing Technology Co., Ltd., SABIC (China) Research and Development Co., Ltd., Hebei Juxun Renewable Resources Recycling Co., Ltd., Colgate-Palmolive (China) Co., Ltd., UPM Raflatac (China) Co., Ltd., South China University of Technology, Shandong Wenyuan Environmental Protection Technology Co., Ltd., Yameida Environmental Protection Technology Co., Ltd., Dongguan Guoheng Plastic Technology Co., Ltd., Guangdong Taihao Zihuan Technology Co., Ltd., Sichuan University, Guizhou Boyu New Energy Technology Co., Ltd., Shenzhen Lvhuan Renewable Resources Development Co., Ltd., China Synthetic Resin Association, Jiangsu Jinfa Resource Recycling Co., Ltd., Tonggui Technology Chengdu Co., Ltd., Qingdao Customs Technology Center, Beijing Huashu Chenguang Technology Co., Ltd., Guangzhou Customs Technology Center, Tianjin University.

2. Quality standards for recycled plastics

"Plastics - Recycled Plastics - Part 4: Polyolefin Mixture (MPO) Materials" (GB/T 40006.4—2025)

Main drafting units: Beijing Huasu Chenguang Technology Co., Ltd., Guangzhou Shitian Material Technology Co., Ltd., Jiangsu Hengtong Cable Technology Co., Ltd., Ningbo Customs Technical Center, Guangzhou Quality Supervision and Testing Research Institute, PetroChina Petrochemical Research Institute, Sinopec (Beijing) Chemical Research Institute Co., Ltd., Fuyang Product Quality Supervision and Inspection Institute, Shandong Daon High Molecular Materials Co., Ltd., Suzhou Runjia High Molecular Materials Co., Ltd., Jiangxi Green Recycling Industry Co., Ltd., China Bluestar Chenguang Chengdu Testing Technology Co., Ltd., Shanghai Chemical Industry Research Institute Co., Ltd., Ningbo Taiyong Auto Parts Co., Ltd., Guangzhou Weigang Environmental Protection Technology Co., Ltd., Jiangsu Antuopu Polymers Co., Ltd., Tonggui Technology Chengdu Co., Ltd., Hangzhou Zhongwang Technology Co., Ltd., Tianjin University, South China University of Technology, Huikeqi (Shanghai) Technology Co., Ltd., Weifang Pengzhou High Molecular Materials Co., Ltd., Guangzhou Customs Technical Center, Suzhou Jin'erhuan New Material Technology Co., Ltd., Qingdao University of Technology, Qingdao Customs Technical Center."Plastics - Recycled Plastics - Part 13: Polyphenylene Ether (PPE) Materials" (GB/T 40006.13-2025)

Main drafting units: Shanghai Juwei New Material Co., Ltd., Hunan Hengyi New Material Co., Ltd., Shanghai Kingfa Technology Development Co., Ltd., Pingdingshan University, Beijing Huasu Chenguang Technology Co., Ltd., Longkou Lijia Electric Co., Ltd., Hangzhou Bensong New Material Technology Co., Ltd., Ningbo Customs Technical Center, SAIC Motor Corporation Limited, China Bluestar Chenguang Chengdu Testing Technology Co., Ltd., Tonggui Technology Chengdu Co., Ltd., Hangzhou Zhongwang Technology Co., Ltd., and Huikeqi (Shanghai) Technology Co., Ltd.

3. Basic standards

"Guidelines for Plastics - Recycled Plastics - Traceability and Environmental Factor Assessment" (GB/T 46043—2025)

Main drafting units: Beijing Huasu Chenguang Technology Co., Ltd., Beijing Academy of Science and Technology Research Institute of Analysis and Testing (Beijing Physical and Chemical Analysis and Testing Center), Sinopec (Beijing) Chemical Research Institute Co., Ltd., China Bluestar Chenguang Chengdu Testing Technology Co., Ltd., Zhejiang Haili Environmental Protection Technology Co., Ltd., PetroChina Petrochemical Research Institute, Shandong Daoen Polymer Materials Co., Ltd., Jiangsu Antuopu Polymers Co., Ltd., Fuyang Product Quality Supervision and Inspection Institute, South China University of Technology, Huitong Chuangyuan Environmental Protection Technology (Anhui) Co., Ltd., Wanrong Rili New Material (Hunan) Co., Ltd., Xuanhuan New Material (Handan) Co., Ltd., Hunan Hengyi New Material Co., Ltd., Kingfa Technology Co., Ltd., Tonggui Technology Chengdu Co., Ltd., Guangzhou Shitian Material Technology Co., Ltd., Guangzhou Weigang Environmental Protection Technology Co., Ltd., Xiamen Luhai Environmental Protection Co., Ltd., Dongguan Guoheng Plastic Technology Co., Ltd., Fujian Hongchang Gongmao Motor Co., Ltd., Jiahua Recycled Nylon (Jiangsu) Co., Ltd., Hunan Xinjiuyuan New Material Technology Co., Ltd., Hainan Inspection and Testing Research Institute, Guangzhou Quality Supervision and Inspection Research Institute, Jiangsu Recycling Resources Recycling and Utilization Association, Shanghai Qianshi Technology Co., Ltd., Qingdao Customs Technical Center, Wuxi Yiwei Import and Export Co., Ltd., Guangzhou Customs Technical Center, Tianjin University, Guizhou University, Shanghai Ruiju Environmental Protection Technology Co., Ltd., Jiahe Juneng (Beijing) Technology Co., Ltd., Anhui Xintao Photoelectric Technology Co., Ltd., Taizhou Yongning Acrylic Products Co., Ltd., Tomson (Jiangsu) Material Technology Co., Ltd., Huikeqi (Shanghai) Technology Co., Ltd.

4. Component identification standards

"Plastics - Identification of Components in Recycled Plastics - Part 1: Polyethylene Terephthalate (PET) Materials" (GB/T 46019.1—2025)

Main drafting units: Guangzhou Customs Technical Center, Sinopec (Beijing) Chemical Research Institute Co., Ltd., Zhili Technology (Guangdong) Co., Ltd., Guangdong Zhongshan Quality and Metrology Supervision and Testing Institute, Zhejiang Haili Environmental Protection Technology Co., Ltd., Beijing Academy of Science and Technology Analytical Testing Research Institute (Beijing Physical and Chemical Analysis and Testing Center), PetroChina Petrochemical Research Institute, Ningbo Customs Technical Center, Beijing Huasu Chenguang Technology Co., Ltd., China Bluestar Chengdu Testing Technology Co., Ltd., Guangzhou Quality Supervision and Testing Research Institute, Tonggui Technology Chengdu Co., Ltd., Jiangsu Saixian New Material Technology Co., Ltd., Fujian Sailong Technology Co., Ltd., Zhejiang Baolvte Environmental Protection Technology Engineering Co., Ltd., Chengdu Huantou Recycling Technology Co., Ltd., Jiangsu Peipu Polymer Technology Co., Ltd., Shanghai Jinhu Rili Plastics Co., Ltd., Danone Asia Pacific (Shanghai) Management Co., Ltd., Shanghai Kangshi Food Technology Co., Ltd., Jinan University, Yunmeng County Debang Industrial Co., Ltd., Fujian Fiber Inspection Center, Wuxi Yiwei Import and Export Co., Ltd., Shenzhen Customs Industrial Product Testing Technology Center, Qingdao Customs Technical Center, Yantai Zhenghai Hetai Technology Co., Ltd., Anhui Peak Technology Co., Ltd., Dynasty (Jiangsu) Environmental Protection Industry Holding Co., Ltd., Zhejiang Jincai New Material Co., Ltd., Shanghai Qianshi Technology Co., Ltd., Dongguan Wansu Cheng Plastics Co., Ltd., Hubei Botao Hefan Co., Ltd., and Hangzhou Zhongwang Technology Co., Ltd.

"Plastics - Identification of Components in Recycled Plastics - Part 2: Polypropylene (PP) Materials" (GB/T 46019.2—2025)

Main drafting units: Guangzhou Customs Technology Center, Huanxin Recycling Materials (Handan) Co., Ltd., Institute of Analysis and Testing of Beijing Academy of Science and Technology (Beijing Physical and Chemical Analysis and Testing Center), Toshiba Home Appliances Manufacturing (Nanhai) Co., Ltd., Fujian Huasheng Mingtu Environmental Protection Technology Co., Ltd., Zhili Technology (Guangdong) Co., Ltd., Guangzhou Shitian Material Technology Co., Ltd., Beijing Huasu Chenguang Technology Co., Ltd., Jiangsu Saixian New Material Technology Co., Ltd., Sinopec (Beijing) Chemical Research Institute Co., Ltd., China Bluestar Chenguang Chengdu Testing Technology Co., Ltd., Ningbo Customs Technology Center, Shandong Daoen Polymer Materials Co., Ltd., Guangzhou Quality Supervision and Testing Research Institute, Tonggui Technology Chengdu Co., Ltd., Zhejiang Baolvte Environmental Protection Technology Engineering Co., Ltd., Tianjin University, Guizhou University, Zhuhai Gree New Materials Co., Ltd., Jinan University, Guangdong Bingxin New Materials Co., Ltd., Kingfa Technology Co., Ltd., Shanghai Chemical Industry Research Institute Co., Ltd., Guangdong Sunwill Saite Engineering Plastics Development Co., Ltd., Fujian Fiber Inspection Center, Wanrong Rili New Materials (Hunan) Co., Ltd., Yantai Zhenghai Hetai Technology Co., Ltd., Qingdao Customs Technology Center, Zhejiang Jincai New Materials Co., Ltd., Hunan Zhongke New Materials Co., Ltd., Shenzhen Rigao Tape New Materials Co., Ltd., Hubei Botao Synthetic Fiber Co., Ltd., Shenzhen Haixinglong Plastic Hardware Products Co., Ltd., Shanghai Qianshi Technology Co., Ltd., Zhongzhi Biaoyan (Beijing) Standardization Service Center, and Shanghai Ruiju Environmental Protection Technology Co., Ltd.

5. Evaluation criteria for recycled plastics

"Technical Specification for Evaluation of Recycled Plastic Products - Part 1: Polyethylene Terephthalate (PET) Material" (GB/T 46018.1—2025)

Main drafting units: Qingdao Customs of the People's Republic of China, Shanghai Ruiju Environmental Protection Technology Co., Ltd., Guangde Quancheng New Material Co., Ltd., Jiangxi Green Recycling Industry Co., Ltd., Donghua University, China Petroleum Group Petrochemical Research Institute Co., Ltd., China Bluestar Chengrand Chengdu Testing Technology Co., Ltd., Hisense Refrigerator Co., Ltd., Jiangsu Antop Polymer Co., Ltd., Qingdao Runxing Plastic New Material Co., Ltd., Qingdao University of Technology, Beijing Shijia Wanlian Technology Co., Ltd., Jiangsu Saixian New Material Technology Co., Ltd., Fuyang Product Quality Supervision and Inspection Institute, Chengdu Huantou Recycling Technology Co., Ltd., Zhangjiagang Customs Comprehensive Technology Center, Oerlikon Barmag Huitong (Yangzhou) Engineering Co., Ltd., Guangdong Xinhuwei Industrial Investment Co., Ltd., Jiahe Wufeng (Hebei) Packaging Technology Co., Ltd., Hangzhou Hanze Industrial Co., Ltd., Anhui Peak Technology Co., Ltd., Ningbo Lishi Daily Necessities Co., Ltd., Wuxi Yiwei Import and Export Co., Ltd., South China University of Technology, Beijing Huasu Chengrand Technology Co., Ltd., Jiangxi Mia New Material Co., Ltd., Shanghai Jinhu Rili Plastic Co., Ltd., Shenzhen Yilian Plastic Co., Ltd., Hebei Tenghong Industrial Co., Ltd., Guangzhou Quality Supervision and Inspection Research Institute, Aoyigao New Material (Wuxi) Co., Ltd., Yantai Zhenghai Hetai Technology Co., Ltd., Guangzhou Customs Technology Center, Hangzhou Zhongwang Technology Co., Ltd., Ningbo Jianfeng New Material Co., Ltd., Tonggui Technology Chengdu Co., Ltd., Dongguan Wansu Cheng Plastic Co., Ltd., Huikeqi (Shanghai) Technology Co., Ltd.

"Technical Specification for Evaluation of Recycled Plastic Products - Part 2: Polystyrene (PS) Materials" (GB/T 46018.2—2025)

Main drafting units: Shanghai Ruiju Environmental Protection Technology Co., Ltd., Qingdao Customs of the People's Republic of China, Jiaxing Anyiju Plastic Industry Co., Ltd., Hubei Midea Refrigerator Co., Ltd., Huanxun New Materials (Handan) Co., Ltd., Guangzhou Shitian Material Technology Co., Ltd., Huitong Chuangyuan Environmental Protection Technology (Anhui) Co., Ltd., Beijing Huasu Chenguang Technology Co., Ltd., Zhuhai Gree New Materials Co., Ltd., Fuyang Product Quality Supervision and Inspection Institute, Kingfa Technology Co., Ltd., Hisense Refrigerator Co., Ltd., Fujian Yinghao Cultural Creativity Co., Ltd., Qingdao University of Technology, South China University of Technology, Wanrong Rili New Materials (Hunan) Co., Ltd., Tianjin Zhonghuan Xinyu Technology Co., Ltd., China Bluestar Chenguang Chengdu Testing Technology Co., Ltd., Guangzhou Quality Supervision and Testing Research Institute, Zhangjiagang Customs Comprehensive Technology Center, Guangzhou Customs Technology Center, Dongguan Guoheng Plastic Technology Co., Ltd., Xinjiang Turpan Natural Environment Testing Research Center, Tonggui Technology Chengdu Co., Ltd., and Huikeqi (Shanghai) Technology Co., Ltd.

Article link: Plastics Machinery Network https://www.86pla.com/news/detail/73568.html